are available from these manufacturers:

DynaQuip Controls

Mead Fluid Dynamics, Inc.

Mindman Industrial

Parker Pneumatics

Precision Dynamics

Spartan Scientific

TPC Pneumatics of North America

Pneumadyne, Inc.

	2-Way & 3-Way Valves
		"O" Series 2-Way & 3-Way Valves The highly reliable "O" Series valve is available in 2-Way or 3-Way normally open or normally closed. Ideal for limited space applications (OAL not more than 2.43") this miniature valve features seven swivel input options- virtually eliminating the need for additional fittings! Closed cross-over The normally closed "O" series features a stem and poppet that work in conjunction with one another. The poppet seals the exhaust port before it opens to flow (normally closed). There is no transitional state from one function to the next providing the user precise control between positions. Vacuum option available on NC only up to 10" Hg. Actuation is via either a nylon toggle, either detented or momentary, or a push button. Swivel inputs are: 18 NPT (M)/10-32 (F), 10-32 (F) Elbow, 10-32 (F) Tee, 1/8 NPT (F), .170 Barb, 1/4 Push-in or 5/32 Push-in. Output is 10-32 (F). Exhaust is not-threaded and exhausts to atmosphere. Standard o-rings are Buna-N. Maximum pressure is 125 PSI. "O" Series Specifications and Options
		"3" Series 3-Way Valves The Pneumadyne "3" Series are 3-way normally closed fully ported valves. Closed cross-over The normally closed "3" series features a stem and poppet that work in conjunction with one another. The poppet seals the exhaust port before it opens to flow (normally closed). There is no transitional state from one function to the next providing the user precise control between positions. The addition of the threaded exhaust port makes it possible to direct and capture the exhaust flow in liquid, clean-room or lubricated air applications. Mufflers can also be threaded in the exhaust port for noise control. Vacuum option available only up to 10" Hg. Actuation is via either a nylon toggle, either detented or momentary, or a push button. Swivel inputs are: 18 NPT (M)/10-32 (F), 10-32 (F) Elbow, 10-32 (F) Tee, 1/8 NPT (F), .170 Barb, 1/4 Push-in or 5/32 Push-in. Output is 10-32 (F). Exhaust is 10-32 (F). Standard o-rings are Buna-N. Maximum pressure is 125 PSI. "3" Series Specifications and Options
		"11" Series 2-Way & 3-Way Valves The "11" Series features 1/8 NPT female and 1/4 push-in connections contributing to higher flow rates. Push-in connections are available on both the input and output ports for plumbing convenience. Closed cross-over The normally closed "11" series features a stem and poppet that work in conjunction with one another. The poppet seals the exhaust port before it opens to flow (normally closed). There is no transitional state from one function to the next providing the user precise control between positions. Actuation is via either a nylon toggle, either detented or momentary, or a push button. Swivel inputs are: 18 NPT (M)/10-32 (F), 1/8 NPT (F), 1/4 Push-in or 5/32 Push-in. Output is 1/8 NPT (F), 1/4 Push-in or 5/32 Push-in. Exhaust is 10-32 (F). Exhaust is not threaded and exhausts to atmosphere. Standard o-rings are Buna-N. Maximum pressure is 125 PSI. "11" Series Specifications and Options
		"10" Series 2-Way & 3-Way Valves The Pneumadyne "10" Series is compact, space saving and provides a cost effective solution for the use of multiple solenoid valves. Fourteen styles of normally closed 2-Way and 3-Way solenoid valves are available for mounting on five styles of manifolds. The solenoid valve can be fixed in either direction on the manifold and coil orientation is independent of valve orientation. The low wattage (0.8 watt) version solenoid valve is ideal for use in low power control circuits. the "10" Series solenoids offer fast response times and consistent operation between valves. Pneumadyne defines valve response time by total plunger travel distance. Actuation is via a 12VDC, 24VAC, 24VDC, 110/120VAC, 220/240VAC 1.0mm orifice solenoid or 12VDC or 24VDC 0.6mm orifice solenoid. Inputs is a 10-32 (F) port for a single solenoid and 1/8 NPT (F) for 2 to 5 solenoids on a manifold. Output is 10-32 (F). Exhaust is not threaded and exhausts to atmosphere; a threaded exhaust port is available. Standard o-rings are Buna-N. Maximum pressure is 125 PSI. "10" Series Specifications and Options
		"20" Series 2-Way & 3-Way Valves Pneumadyne's "20" Series combines the highly reliable construction of the "O" Series valve with a solenoid actuator, resulting in a long life, high flow, low wattage valve. Pneumadyne tested over 20 million cycles, these low watt solenoid actuators (0.8 watt & 3.1VA) produce a Cv of .24 and are available in three voltages. The "20" Series valves are also available with a variety of momentary and detented actuators in nylon or metal. The standard "tee" base provides a convenient method of plumbing consecutive valves. A plug (SPG-10) is furnished to permit the use of one input port and provide installation versatility. the "20" Series also offers mounting versatility- valves can be easily secured to a machine member using two .20 diameter holes (no need for mounting brackets) or panel mounted using the 15/32-32 threaded neck (manual style only- nuts and lockwashers are provided). Actuation is via an integral air pilot, 120VAC 1.0mm orifice solenoid or 12VDC or 24VDC 0.6mm orifice solenoid; or by push button, momentary toggle or detented toggle. Inputs is a 10-32 (F) port . Output is 10-32 (F). Exhaust is 10-32 (F). Standard o-rings are Buna-N. Maximum pressure is 125 PSI. "20" Series Specifications and Options
		"200" / "300" Series 2-Way & 3-Way Valves The "200" & "300" Series valves feature a miniature size and a single stem design. The "200" Series valve features 1/16 barbed porting and is ideal for use as a pilot service device. The "300" Series is available with five porting configurations offering the following: 10-32 (F) Input/Output: Ideal for use as a pilot actuating device and for basic on/off functions Rear Ported: Streamlined profile with side-by-side porting for use in space constrained applications. 1/8 NPT (M) Input: Ideal for direct mounting in a manifold or other machine member Cartridge: Ideal for use in manifold systems and custom applications where space is limited. 10-32 (F) Fully ported: Threaded exhaust port can be used in applications to direct and capture exhaust flow. Actuation is via an integral air pilot, ball, push button, momentary toggle or detented toggle. Standard o-rings are Buna-N. Maximum pressure is 125 PSI. "200"/"300" Series Specifications and Options
		"400" Series 2-Way & 3-Way Valves The "400" Series valve is available in 2-Way & 3-Way Normally Closed, Standard, Side and Rear Ported (3-Way exhausts to atmosphere) or as a 3-Way Normally Closed Fully Ported valve. The 1/8 NPT (F) Standard Ported valve features 1/8 NPT female bottom input and side output ports. The exhaust port is non-threaded and is located opposite the output port. The 1/8 NPT (F) Rear Ported valve features parallel bottom input and output porting with a streamlined design ideal for use in space constrained applications. The 1/8 NPT (F) Fully Ported and 1/8 (F) Side Ported valves feature a threaded exhaust port that can be used in applications to direct and capture exhaust flow. Actuation is via ball, push button, momentary toggle or detented toggle. Inputs and Outputs are 1/8 NPT female ports. Exhaust on standard, side and rear ported is non-threaded and exhausts to atmosphere while the fully ported version has an 1/8 NPT female port. Standard o-rings are Buna-N. Maximum pressure is 125 PSI. "400" Series Specifications and Options
		3-Position Toggle Series 2-Way & 3-Way Valves The 3-Position Toggle Valve offers the highest flow rate of the Pneumadyne valve line. This dual function product contains two valves in one body with a common input and common exhaust. When the toggle is centered in the 2-Way configuration all ports are blocked, in the 3-Way configuration both output ports are open to exhaust. Actuation is via detented-detented toggle, momentary-momentary toggle or detented-momentary toggle. Inputs and Outputs are 1/8 NPT female ports. Exhaust is non-threaded and exhausts to atmosphere. Standard o-rings are Buna-N. Maximum pressure is 125 PSI. 3-Position Toggle Series Specifications and Options
	4-Way Valves
		"4" & "45" Series 4-Way Valves 4-way valves are one of the most commonly used pneumatic components for directional control. A 4-Way has four distinct flow paths within the valve and is commonly used to cause reversible motion of a cylinder or motor. Pneumadyne manufactures two complete series of 4-way valves featuring multiple actuator and porting options. The "4" Series valves feature five actuator options including a specially design Heavy Duty Toggle for use in rugged applications. The "45" Series valves feature higher flow rates with a balanced spool design that allows function versatility. Both Series are available with push-in fittings for plumbing convenience. Actuation is via push button, momentary toggle or detented toggle. Standard o-rings are Buna-N. Maximum pressure is 125 PSI. "4" & "45" Series Specifications and Options

		Accessories for Valves Accessories to customize and enhance Pneumadyne's standard product line are sold separately. Featuring Armored Push Button Operator Designed for use on Pneumadyne push button valves (15/32-32 Thd) and available in two button styles. Manufactured from stainless steel with a silicone boot providing corrosion protection and a tight seal. (Not for use on "4" Series valves) Overstroke Operator Designed for use on Pneumadyne push button valves (15/32-32 Thd) in applications where actuation stroke lengths may vary. Provides a larger contact surface with greater tactile feedback and a maximum overstroke of .73 inches. External Air Pilot Operator Designed for use on Pneumadyne push button valves (15/32-32 Thd) and available in two port sizes. A brass piston and Buna-N cup seal ensure consistent leakproof actuation (the valve returns the piston). Ideal for remote actuation of valves using a pneumatic signal. Ball Operator Designed for use on Pneumadyne push button valves (15/32-32 Thd). A captured stainless steel ball bearing has direct contact with the valve button. (Not for use on "4" Series valves) Heavy Duty Operator The heavy duty operator is designed for useo on Pneumadyne push putton valves and is available in push and push-to-lock styles. Ideal for heavy duty industrial use. Foot, Hand, Knee Operator Designed for use with Pneumadyne "O", "11" and "300" Series valves. An Adhesive backed thick rubber pad is riveted to the black dichromate plated steel pedal for skid resistance and comfort. (Not for use on "4" or "$%" 1/8 NPT Series valves) Cam Operators Designed for use on Pneumadyne push button valves and available in three styles. All are manufactured from steel with electro nickel plating. The roller is manufactured from durable acetal plastic. All cams feature a unique acetal pad which minimizes side load and virtually eliminates wear. (Not for use on "4" Series valves) Thumb Operator Designed for use on Pneumadyne push button valves to provide greater tactile surface and reduce operator fatique. Features a unique acetal pad which minimizes side load and virtually eliminates wear. (Not for use on "4" Series valves) Dress Plates Dress plates are manufactured from aluminum and are either black anodized or electroless nickel plated for appearance and corrosion resistance. To provide a finished look first install the dress plate on the valve then tighten from behind the control panel. Mounting Brackets The flat and angled mounting brackets are manufactured from steel and provide a convenient method for mounting valves to a machine member. Micro Gauge Ideal for space constrained applications that require separate pressure readings. The micro gauge is easily installed using the 1/8 NPT male thread. The micro gauge can be mounted on the Pneumadyne "11" Series regulators with an extended gauge port, provideing a point of use pressure indicator. Oil Tight Operators The Pneumadyne oil tight operator line inlcudes: key locking controls, twist operators, and a selection of push buttons in flush, extended and mushroom styles. all operators offer easy actuation and several are available in assorted colors, useful in coding complex control panels. Features Oil tight seal Matches electrical controls Custon adapter fits hundreds of Pneumadyne valves Rugged panel mount operator Accessories Specifications and Options

		System 11 Valve Consolidation System 11 is a method of consolidating 2 to 10 components with a common pressure source. Components available for placement on the System 11 manifold include "11" Series Regulators, "11" Series Valves ("A" style recommended) and "11" Series Needle Valves. All products feature swivel output porting for alignment convenience. Optional accessories include air pilot operator, micro gauges, thumb operator and armored push button operator. All System 11 assemblies are designed per order. Accessories Specifications and Options

		Multiple Connection Manifolds Manifolds provide a convenient junction point for the distribution of fluids in applications such as control systems or in networks that require multiple branching. There are 5 series of manifolds available: 10-32 ports in single, double or triple configurations with 4 to 30 stations; twin input port manifolds in 4 configurations with 2 to 10 stations in 2 port sizes; Dual Air™ two manifolds in a single block with 2 to 5 stations; junction blocks with 4 to 10 stations in 3 port sizes; and terminal blocks with 2 to 10 stations in 3 port sizes. Manifold Specifications and Options

[ Flo-Products Home ] [ Pneumatic Products ]
[ Pneumatic Valves Previous Page ] [ Pneumatic Valves Next Page ]

Access for non-Javascript enabled browsers

2-Way & 3-Way Valves
"O" Series 2-Way & 3-Way Valves
"3" Series 3-Way Valves
"11" Series 2-Way & 3-Way Valves
"10" Series 2-Way & 3-Way Valves
"20" Series 2-Way & 3-Way Valves
"200" / "300" Series 2-Way & 3-Way Valves
"400" Series 2-Way & 3-Way Valves
3-Position Toggle Series 2-Way & 3-Way Valves
4-Way Valves
"4" & "45" Series 4-Way Valves
Accessories
Accessories
System 11
System 11 Valve Consolidation
Manifolds
Manifolds

If you are located in Missouri, Kansas, Nebraska, or Illinois, you may contact us at the
following telephone and fax numbers with your requests or questions:
St. Louis telephone 314.428.4000 fax 314.428.4097
Kansas City telephone 913.829.5900 fax 913.829.0815

For ALL OTHER AREAS Please use the Info Request form for specific product information, pricing or other information.
Please include company name, contact name, address, phone number and fax number to ensure a timely response.

Send e-mail to webmaster@flo-products.com with questions or comments about this web site.
Copyright © 2005 Flo-Products Company
Last modified: