[Flo-Products Company Logo]

Parker Pneumatics - Watts FluidAir

QUBE Modular FRL System

QUBE Modular Components

QUBE modular components are used to provide the connections between QUBE f-r-ls and the associated piping. They provide the ability to branch lines off of the f-r-l; rotate components 90 degrees; and divert the air flow with minimal pressure drop. QUBE components connect to one another by means of an O-ring seal and two machine screws.
Every QUBE component except regulators and integral filter/regulators come with an O-ring and two screws.
 
bullet

SV Series Shut-off Valve

This shut-off valve has the following characteristics:
  • Threaded ports allows use in-line or with other QUBE modular FRL components.
  • Accepts customer supplied standard single padlock or safety lock for multiple lockout.
  • Conforms to OSHA standard 29 CFR part 10.
  • 3 port/2 position shut-off valve relieves downstream pressure when closed.
  • SV valves can be locked in the closed position only.
  • Maximum pressure: 300 psig.
  SV35 SV75 SV105
Port size 1/8" SV35-01    
Port size 1/4" SV35-02 SV75-02  
Port size 3/8"   SV75-03 SV105-03
Port size 1/2"   SV75-04 SV105-04
Port size 3/4"     SV105-06
Length of Lock Shackle 2-1/2" 3-1/16" 4-3/16"
Height and Depth 1-5/8" 2" 2-11/16"
Width 1-9/16" 1-3/4" 2-1/8"
Weight (lbs.) 0.78 0.95 1.70

 
 
bullet

End Plates

End plates are designed to allow you to install or remove your basic components without direct pipe connections to the components. In addition, each series has end plates one port size larger than the basic units, allowing you to take full advantage of the QUBE's superior performance. There are two types: Type 0731 has slots for screw pass through, and Type 0732 has tapped holes.
 
Kit Number Port Sizes** Contains Application
Type 0731 Type 0732 Screws O-Rings
PK3500-** 01(1/8"),02(1/4"),03(3/8") 0 1 0 0 shut off
PK3510-** 01(1/8"),02(1/4"),03(3/8") 1 1 2 1 filter or lubricator
PK3520-** 01(1/8"),02(1/4"),03(3/8") 1   2 1 R,B,FRL,BL w/shut off
PK3530-** 01(1/8"),02(1/4"),03(3/8") 2   4 2 R,B,FRL,BL
PK5500-** 02(1/4"),03(3/8"),04(1/2") 0 1 0 0 shut off
PK5510-** 02(1/4"),03(3/8"),04(1/2") 1 1 2 1 filter or lubricator
PK5520-** 02(1/4"),03(3/8"),04(1/2") 1   2 1 R,B,FRL,BL w/shut off
PK5530-** 02(1/4"),03(3/8"),04(1/2"),06(3/4") 2   4 2 R,B,FRL,BL
PK1050-** 02(1/4"),03(3/8"),04(1/2"),06(3/4") 0 1 0 0 shut off
PK1051-** 02(1/4"),03(3/8"),04(1/2"),06(3/4") 1 1 2 1 filter or lubricator
PK1052-** 02(1/4"),03(3/8"),04(1/2"),06(3/4") 1   2 1 R,B,FRL,BL w/shut off
PK1053-** 02(1/4"),03(3/8"),04(1/2"),06(3/4") 2   4 2 R,B,FRL,BL

 
Series Plate Type Dimensions
Plate Height Plate Depth Plate Thickness Slot Width Tapped Hole Thread
35 0731 1.594 1.594 0.900 0.172 N/A
35 0732 1.594 1.594 0.900 N/A #8-32 UNC-2B
55 0731 2.000 2.000 0.703 0.219 N/A
55 0732 2.000 2.000 0.703 N/A #10-32 UNF-2B
105 0731 2.688 2.688 1.000 0.266 N/A
105 0732 2.688 2.688 1.000 N/A #¼-20 UNC-2B

 
 
bullet

Porting Blocks (105 Series)

Designed to fit within any 105 Series combination, providing two 3/8" branch lines. There are two types: Type 0733 has slots for screw pass through, and Type 0734 has tapped holes.
 
Series Plate Type Dimensions
Plate Height Plate Depth Plate Thickness Slot Width Tapped Hole Thread
105 0733 2.688 2.688 1.000 0.266 N/A
105 0734 2.688 2.688 1.000 N/A #¼-20 UNC-2B

 
Part Number Application Contains
Type 0733 Type 0734 Long Screws Short Screws O-Rings Branch Line
PK1054 between filter & regulator; reg. & lubr.; end plate & filter, lub. & end plate 1     1 1 3/8" NPT
PK1055 between filter & coalescer; filter & lubricator   1 4   2 3/8" NPT
  *Similar to Type 0733 without O-ring grooves  

 
 
bullet

Branch Blocks (35 & 55 Series)

These blocks function as end plates with 1/8" NPT branch lines available top and bottom. In addition, they are used in conjunction with direction plates and regulators to provide outlets for gauges.
 
Part Number Inlet Port Branch Port Dimensions
Plate Thickness Plate Height Plate Depth
BB35-1-1 1/8" 1/8" 0.900 1.610 1.610
BB35-2-1 1/4" 1/8" 0.900 1.610 1.610
BB55-2-1 1/4" 1/8" 0.940 2.000 2.000
BB55-3-1 3/8" 1/8" 0.940 2.000 2.000
BB55-3-2 3/8" 1/4" 0.940 2.000 2.000

 
 
bullet

Direction Plates

Direction plates are designed to allow 90° rotation of QUBE components allowing manifolding of units and resulting in great space and cost savings. They are also used to mount units from different series to one another.
 
Part Number Dimensions
Plate Thickness Plate Height Plate Depth
DP35 0.203 1.610 1.610
DP55 0.299 2.000 2.000
DP105 0.344 2.688 2.688

 
 
bullet

Diverter Blocks

Diverter blocks are designed to mount in a variety of configurations with the capability of having branch line components mounted directly, giving multiple air lines with minimal pressure drop. Use untapped blocks within components, either at beginning or end of system.
 
Part Number Dimensions Application
Plate Thickness Plate Height Plate Depth Inlet Port Branch Port
DK3510-3-2 1.930 1.690 1.690 3/8" NPT 1/4" NPT tapped 3/8" in & out, two 1/4" branches
DK7510 2.000 2.000 2.000 N/A 1/4" NPT in & out not tapped, two 1/4" branches
DK7510-3-2 2.000 2.000 2.000 3/8" NPT 1/4" NPT tapped 3/8" in & out, two 1/4" branches
DK7510-3-3 2.000 2.000 2.000 3/8" NPT 3/8" NPT tapped 3/8" in & out, two 3/8" branch lines
DK1051-6-4 2.750 2.690 2.69 3/4" NPT 1/2" NPT tapped 3/4" in & out, two 1/2" branch lines

 

 
If you are located in Missouri, Kansas, Nebraska, or Illinois, you may contact us at the
following telephone and fax numbers with your requests or questions:
St. Louis telephone 314.428.4000 fax 314.428.4097
Kansas City telephone 913.829.5900 fax 913.829.0815
 
For ALL OTHER AREAS Please use the Info Request form for specific product information, pricing or other information.
Please include company name, contact name, address, phone number and fax number to ensure a timely response.
 
Send e-mail to webmaster@flo-products.com with questions or comments about this web site.
Copyright © 2005 Flo-Products Company
Last modified:
Brochure: 8999966 7/03 5M