MP Filtri, Inc. Filter Elements

	Suction Filters
		Series CA filter elements are designed for the FAS series filter assembly. They are available in 6 nominal sizes with 4 degrees of wire mesh filtering from 25 to 250 micron. End caps are steel; support tube is galvanized steel; supporting framework is galvanized steel with epoxy coating. Dirt Holding Capacity is in accordance with ISO 4572.
		Series SF filter elements are designed for the SF2 series filter assembly. They are available in 6 nominal sizes with 1 degree of inorganic fiber (polyester) filtering at 25 micron and 4 degrees of wire mesh filtering from 25 to 250 micron. End caps are steel; support tube is galvanized steel; supporting framework is galvanized steel with epoxy coating. Dirt Holding Capacity is in accordance with ISO 4572.
		Series STR filter elements are designed to be used as directly immersed filters. They are available in 17 nominal sizes with 3 degrees of wire mesh filtering from 60 to 250 micron. End caps are nylon; support tube, upper and base plates are galvanized steel. A nylon bypass valve is optional. BSP or NPT thread sizes range from 3/8" to 3". Dirt Holding Capacity is in accordance with ISO 4572.
		Series MPA/MPM filter elements are designed to be used as directly immersed filters. They are available in 16 nominal sizes with 3 degrees of wire mesh filtering from 60 to 250 micron. End caps are nylon; support tube, upper and base plates are galvanized steel. Series MPA does not have an internal magnet while Series MPM does. BSP or NPT thread sizes range from 3/8" to 3". Dirt Holding Capacity is in accordance with ISO 4572.
	Return Filters
		Series CU filter elements are designed for the FRI series filter assembly. They are available in 6 nominal sizes with 4 degrees of inorganic fiber with acrylic support filtering at 3 to 25 micron, 2 degrees of resin-impregnated paper filtering from 10 to 25 micron and 5 degrees of wire mesh filtering from 10 to 250 micron. End caps are reinforced nylon; support tube is galvanized steel; supporting framework is galvanized steel with epoxy coating. Integral bypass valve is optional. Seals may be either Buna N or Viton. Dirt Holding Capacity is in accordance with ISO 4572.
		Series MF filter elements are designed for the MPF and MPT series filter assemblies. They are available in 6 nominal sizes and 3 bowl lengths for the MPF series and 2 nominal sizes and 3 bowl lengths for the MPT series with 4 degrees of inorganic fiber with acrylic support filtering at 3 to 25 micron, 2 degrees of resin-impregnated paper filtering from 10 to 25 micron and 3 degrees of wire mesh filtering from 25 to 90 micron. End caps are nylon; support tube is galvanized steel; supporting framework is galvanized steel with epoxy coating. Integral bypass valve is optional. Seals may be either Buna N or Viton. Dirt Holding Capacity is in accordance with ISO 4572.
		Series MR filter elements are designed for the MPH and MPI series filter assemblies. They are available in 4 nominal sizes and 4 bowl lengths for the MPH series and MPI series with 3 degrees of inorganic fiber with acrylic support filtering at 10 to 25 micron, 2 degrees of resin-impregnated paper filtering from 10 to 25 micron and 3 degrees of wire mesh filtering from 25 to 90 micron. Support tube, upper and base plates is galvanized steel; supporting framework is galvanized steel with epoxy coating. Integral bypass valve is optional. Seals may be either Buna N or Viton. Dirt Holding Capacity is in accordance with ISO 4572.
	Spin-On Filters
		Series CS filter elements are designed as European Standard replacements for filter assemblies requiring spin-on filters. They are available in 4 nominal sizes with 4 degrees of inorganic fiber with acrylic support filtering at 3 to 25 micron, 2 degrees of resin-impregnated paper filtering from 10 to 25 micron and 2 degrees of wire mesh filtering from 60 to 90 micron. Support tube, upper and base plates is galvanized steel; supporting framework is galvanized steel with epoxy coating. Seals may be either Buna N or Viton. Dirt Holding Capacity is in accordance with ISO 4572.
		Series CSD
		Series CSG filter elements are designed for American Standard replacements for filter assemblies requiring spin-on filters. Characteristics same as Series CS.
		Series CSGW filter elements are designed for American Standard replacements for filter assemblies requiring spin-on filters. The CSGW series removes water from oil and filters the oil at the same time. Polymers, water-absorbent up to 800 times their own weight, provide this major feature. CSGW 050 canisters can hold up to 240 ml of water. CSGW 100 canisters can hold up to 437 ml of water. CSGW 150 canisters can hold up to 788 ml of water. Other characteristics same as Series CS.
		Series CT
	Medium-High Pressure Filters
		Series CU filter elements are designed for the LMP series filter assembly. They are available in 8 nominal sizes with 4 degrees of inorganic fiber with acrylic support filtering at 3 to 25 micron, 2 degrees of resin-impregnated paper filtering from 10 to 25 micron and 5 degrees of wire mesh filtering from 10 to 250 micron. End caps are reinforced nylon; support tube is galvanized steel; supporting framework is galvanized steel with epoxy coating. Integral bypass valve is optional. Seals may be either Buna N or Viton. Dirt Holding Capacity is in accordance with ISO 4572.
		Series HP filter elements are designed for the FHP series filter assembly. They are available in 9 nominal sizes with 4 degrees of inorganic fiber with acrylic support filtering at 3 to 25 micron, 2 degrees of resin-impregnated paper filtering from 10 to 25 micron, 3 degrees of wire mesh filtering from 10 to 60 micron, and 2 degrees of triangular stainless steel mesh filtering from 10 to 25 micron. Inner core and caps are galvanized steel; support frames are stainless and galvanized steel with epoxy coating. Seals may be either Buna N or Viton. Dirt Holding Capacity is in accordance with ISO 4572.
		Series HP 037 filter elements are designed for the FMP series filter assembly. They are available in 2 nominal sizes with 4 degrees of inorganic fiber with acrylic support filtering at 3 to 25 micron, 2 degrees of resin-impregnated paper filtering from 10 to 25 micron and 3 degrees of wire mesh filtering from 10 to 60 micron. Support tube and upper plate are galvanized steel; base plate is glass-coated polyamide; supporting framework is galvanized steel with epoxy coating. Seals may be either Buna N or Viton. Dirt Holding Capacity is in accordance with ISO 4572.

[ Flo-Products Home ] [ Hydraulic Products ] [ Hydraulic Filters ]

If you are located in Missouri, Kansas, Nebraska, or Illinois, you may contact us at the following telephone and fax numbers with your requests or questions:
St. Louis telephone 314.428.4000 fax 314.428.4097
Kansas City telephone 913.829.5900 fax 913.829.0815
 
For ALL OTHER AREAS Please use the Info Request form for specific product information, pricing or other information. Please include company name, contact name, address, phone number and fax number to ensure a timely response.
 
Send e-mail to webmaster@flo-products.com with questions or comments about this web site.
Copyright © 2003 Flo-Products Company
Last modified: