are available from these manufacturers:

Arrow Pneumatics, Inc.

Mindman Industrial Co., Ltd.

Parker Pneumatics - Watts FluidAir

Sizto Tech, Inc.

Zander Filter Systems, Inc.

Parker Pneumatics - Watts FluidAir

	QIX Modular FRL System QIX is the Premium FRL System for the Demanding, High-Performance Manufacturer Addressing the needs of the production-oriented plant more than a decade ago, WATTS FluidAir pioneered a break-through in FRL technology - The QIX Series of high-flow, generously-sized filters, regulators, lubricators, and accessories. Designed around the parameters of one inch pipe, every QIX component is manufactured with wide open internal porting for maximum efficiency and optimum performance at flow rates up to 250 SCFM. QIX Means Less Down Time QIX is short for "Quick Insert eXchange." And quick it is! By means of removeable connector-inserts, any QIX unit easily adapts to a variety of pipe sizes ranging from 1" down to 1/4". Quite simply, each time you change pipe size or units, you change only the insert - not the filter, regulator, or lubricator. Pull two pins with a pair of pliers and your change is made in seconds! QIX Means Less Inventory Plus Simplified Specification, Ordering and Service The QIX concept enables you to stock one basic size filter, regulator, and lubricator module along with an assortment of economical insert kits. You save as much as 50% on inventory. Working with fewer part numbers, you simplify engineering specs, lessen purchasing efforts and improve overall service.
		QIX Model F20 Air Line Filter This filter features interchangeable QIX inserts that allow one module to accomodate 5 port sizes: 1/4", 3/8", 1/2", 3/4" & 1". It provides a two-stage air cleaning action: {1} a finned plate creates high velocity cyclonic motion which causes water and heavier particles of dirt to be hurled out by centrifugal force to the sides of the bowl where they drain off, (2) a non-corrosive 40-micron or optional 5-micron filter element removes up to 99% of residual solids. An easy-open manual drain is standard. Internal float drains or internal piston drains are optional. A one-piece, generous-sized metal bowl with integral sight glass is standard. Sight glass is pre-positioned in-line to protect against accidental damage. A red luminescent sight glass level indicator can be read from either the front or the back. Maximum pressure is 250 PSI; maximum pressure with Auto Drain is 175 PSI. Body is zinc. Air flow ranges from 66 to 185 SCFM depending on port size. Model F20 Specifications and Options

		QIX Model F21 Coalescing Filter This filter features interchangeable QIX inserts that allow one module to accomodate 5 port sizes: 1/4", 3/8", 1/2", 3/4" & 1". The highly efficient QIX Coalescing Filters remove 99.99% of particles and aerosols as small as 0.3 microns. QIX coalescers operate on a different principle than air filters. The filter element is made up of a network of narrowly spaced fibers which trap smaller contaminants and hold any liquid particles which come in contact with the fibers. An easy-open manual drain is standard. Internal float drains or internal piston drains are optional. A one-piece, 10 ounce metal bowl with integral sight glass is standard. As with the F20 filter, the sight glass is pre-positioned in-line to prevent accidental damage. A F20 filter used as a pre-filter upstream is recommended to extend the life of the coalescing element. Maximum pressure is 250 PSI; maximum pressure with Auto Drain is 175 PSI. Body is zinc. Air flow capacity is 20 SCFM. Model F21 Specifications and Options

		QIX Model R20/R21 Regulator Interchangeable QIX inserts that allow one module to accomodate various pipe sizes. May be removed from the line in seconds with just a pair of pliers. Large, free-floating piston gives greater sensitivity, faster response, and better overall performance. Choose either the T-handle model (R21) or the popular, 3-position adjustment knob (R20). Backing off the regulator to zero PSI enables quick replacement of the piston and spring using only a pair of pliers without shutting down the air supply. Reduced pressure range 0-125 PSI is standard with optional ranges of 0-60 PSI or 0-250 PSI available at no extra cost. Maximum pressure is 300 PSI. Body is zinc. Air flow capacity ranges from 28 SCFM to 260 SCFM depending on pressure drop and port size. Model R20/R21 Specifications and Options

		QIX Model L20 Lubricator Interchangeable QIX inserts that allow one module to accomodate various pipe sizes. May be removed from the line in seconds with just a pair of pliers. The Perma-Fog® lubrication principle, pioneered by WATTS, enables reliable operation over an extremely wide range of air flows from 2 SCFM to 250 SCFM. It incorporates an automatic bypas valve with a high velocity venturi to minimize pressure drop and ensure consistant lubrication at all rated flows. Its precision, oil feed adjustment dial is tamperproof. A full flow sight dome enables a clear view of the oil drip rate. Your lubricator can be filled under pressure rigth to the top. Two large fill ports are standard. A one piece metal bowl has it integral sight glass pre-positioned in-line to avoid accidental damage. A red luminescent level indicator can be read from either the front or back of the unit. Any QIX unit may be removed from the line for service or replacement without breaking any pipe connections. Simply pull two pins with a pair of pliers. Maximum pressure is 250 PSI. Body is zinc. Model L20 Specifications and Options

		QIX Model B20/B21 Integral Filter/Regulator You get all the features and performance of a QIX filter and a QIX regulator in one compact package. You save space with shorter port-to-port dimensions. Choose either the T-handle model (R21) or the popular, 3-position adjustment knob (R20). Backing off the regulator to zero PSI enables quick replacement of the piston and spring using only a pair of pliers without shutting down the air supply. Reduced pressure range 0-125 PSI is standard with optional ranges of 0-60 PSI or 0-250 PSI available at no extra cost. The integral unit may be combined with a QIX lubricator to make a compact, economical 2-piece FRL unit. Model B20/B21 Specifications and Options

		QIX Model C20/C21 Combination Units QIX Combination Units come in 4 variations: BL - Integral Filter/Regulator (B20/B21), Lubricator (L20), Gauge FRL - Filter (F20), Regulator (B20/B21), Lubricator (L20), Gauge FR - Filter (F20), Regulator (B20/B21), Gauge FL - Filter (F20), Lubricator (L20), Gauge QIX Combination Unit specifications are the sum of the parts in the combination unit. Interchangeable QIX inserts that allow one module to accomodate various pipe sizes. May be removed from the line in seconds with just a pair of pliers. Model C20/C21 Specifications and Options

		QIX Series Accessories QIX accessories include the following: End Insert Kits Each kit includes two threaded inserts used on the ends of any QIX component (or combination of QIX components) for attaching to piping. Kits also contain 2 O-rings, 21 pins and a lubricant package. Port sizes are: 1/4" NPT (Part No. IK20Y), 3/8" NPT (Part No. IK20X), 1/2" NPT (Part No. IK20A), 3/4" NPT (Part No. IK20V), 1" NPT (Part No. IK20C) Combination Kits Part No. IK20CC - Each kit includes a single, non-threaded insert which enables you to connect any two QIX units in combination. Kits also include 2 O-rings, 2 pins and a package of lubricant. Porting Blocks Part No. IK20CP - You can use this element to connect any two QIX units in combination and gain an extra 1/4" NPT outlet port on top. Use upstream of the regulator to gain unregulated pressure for use elsewhere in your system. Or use upstream of your lubricator to gain regulated, unlubricated air. Heavy Duty Mounting Kit Part No. MK20-0100 - Allows wall mounting of QIX units with "L" brackets that attach directly to port inserts. 2 brackets and 4 screws per kit. Shut Off Valve (with Lockout) Model IK20V - This modular, 3-way ball valve attaches to any QIX component with standard QIX inserts. Mounted upstream, the valve provides a convenient shut off capability for servicing your pneumatic machinery and equipment. In the "off" position supply air is blocked and downstream air pressure is vented back through an exhaust port that is tapped 1/8-27 NPTF. The valve comes standard with a "lockout" feature as required by OSHA Standard 1910.147 Pressure Switch Model PST20 - A low cost miniature pressure switch easily integrates into your QIX system via a porting block. The switch provides an electric signal when set pressure is achieved. PST20 kit includes P01907 switch, porting block, bushing, and necessary hardware for mounting.

	F901 Series High Efficiency Compressed Air Filter F901 Series offer a complete line of High Effeciency Filters from 1/4" to 2 1/2" connections yielding a SCFM from 35 to 780.
		F901 Series Cartridges WATTS FluidAir offers 5 grades of filtration to insure sensitive pneumatic system components are receiving clean oil fee air cost effectively. Each filter grade is designed to slip on and off the filter head easily thereby minimizing downtime. The captivated end cap o-ring blocks the bypass of contaminated air downstream. Features include: chemical resistant end caps; large void volumes to minimize pressure drop and extend cartridge life; corrosion resistant inner and outer support cores for maximum structural integrity; each grade cartridge provides two stage filtration; "Pull Off/Push On" each change cartridge with captured o-ring minimizes downtime and simplifies maintenance; and good for temperatures to 150°F (66°C). Series F901 Cartridges Specifications and Options

		Series F901 High Efficiency Compressed Air Filters Series F901 filters offer unique features: connections are modular for multiple filter installations; differential pressure indicators except for the activated carbon filters; bayonet bowl connection for ease of maintenance in port sizes up to 1 inch; quick change cartridge - 5 grades available from 0.1 micron to 40 micron; durable epoxy powder paint finish; condensate level sightglass and float thru port size 1 1/2 inches; automatic float drains are standard on all port sizes, and audible safety warning. Bodies are zinc to 1 inch port size and aluminum from 1 inch 250 SCFM up. Bowl is zinc up to 3/4 inch, aluminum from 3/4 to 1 1/2 inches, and steel for 2 inches and up. Series F901 Specifications and Options

		F901 Series Accessories Accessories include: Mounting Bracket Kits - Each kit includes mounting bracket and 4 screws to attach to filter head. Screws / bolts to attach brack to wall or machine must be purchased separately. • Part No. SAF901-0572 for filters 1/4" to 1/2"; • Part No. SAF901-0571 for filters 3/4" and up. Modular Connector Kits - For multiple filter installations. • Part No. AK900S for filters 1/4" thru 1"; • Part No. AK900B for filters 1" (250 SCFM) and up. Differential Pressure Slide Indicator DP375 - • Standard on 1/4", 3/8" and 1/2" port filters. • Increase in pressure drop will cause slide to change from green to red. • All red slide indicates need to change filter cartridge. Differential Pressure Gauge DP376 - • Standard on 3/4" through 2 1/2" port filters. • Easy to read dial face indicates pressure drop and need for element replacement. • Three color dial face. • Readable both sides. • Non pressurized dial face. Electric Drain ED900 - Recommended for filters removing heavy liquid loads. Bottom of 2 inch and 2 1/2 inch filters have 1/2 inch NPT port to accommodate drain. Other filters require adapters. • Includes manual override. • Large orifice 7/16" prevents clogging. • Adjustable Off Time: 1-45 minutes • Adjustable On Time: 1-45 seconds • Power On Indicating Light • Valve Open Indicating Light • Minimum Working Pressure: 3 psig • Maximum Working Pressure: 150 psig • Part No. ED900-02 - 1/4" NPT • Part No. ED900-04 - 1/2" NPT

	700 Series High Efficiency Compressed Air Filters Watts FluidAir, a world leader in the design and manufacture of Filters, Regulators and Lubricators, offers a complere range of high performance in-line filters for contamination removal. Watts 700 Series in-line filters offers the cost conscious user high flow rates, minimal pressure drop and effective contamination removal. THE PROBLEM - Pneumatic System Contamination A cubic foot of atmospheric air contains water vapor, hydrocarbons, and thousands of solid particles. When a compressor intakes this air, the contaminants are submitted to high pressures and temperatures. The air compressor also adds oil, liquids and praticulate matter. Under high pressure and temperature, the contaminants often remain suspended in the lines. But, as the air travels downstream and cools, the moisture and contaminants condense. The result ... compressed air lines flooded with a thick corrosive sludge that will tamage pipework, pressure vessels, tools, valves, and other downstream pneumatic equipment. The contamination will cause premature wear of products, increased pressure drop, decreased product performance, increased product malfunction, and poor surface finishes. All this leads to added operating expense. THE ANSWER - Contamination Removal with Watts High Efficiency Filters Removing the damaging contamination by installing a Watts 700 Series Filtration System. By removing the corrosive contaminants, your hidden costs will decrease while product quality and production efficiency increase. The Watts 700 Series Filters utilize the highest quality materials available in the manufacture of housings and elements. Watts 700 Series Filters remove particulate and liquid contamination from compressed air via four methods: Gravitational Settling, Impact, Interception, and Diffusion.

		Model F701/F702 High Efficiency Compressed Air Filters The 700 Series Filter is comprised of two models: Model F701 which is a coalescing filter with either .3 micron or .7 micron elements, and Model F702 which is a particulate filter with either a .9 micron element or an adsorber element. Both models are available with port sizes from ¼" to 2½" NPT. Model F702 with particulate element has flow rates from 25 to 1000 CFM. Model F701 with a .3 micron element has flow rates from 15 to 750 CFM. A Model F701 coalescing filter should always be preceeded by a Model F702 particulate filter to extend the life of the coalescing element. A differential pressure pop-up indicator is standard on F701 filters from ¼" to 1". On F701 filters from 1¼" thru 2½" NPT, a differential pressure gauge is standard. Maximum pressure is 250 psig for zinc bowls, and 300 psig for aluminum or steel bowls. Options include mounting brackets, internal auto drain, external auto drains, electric drains, and remote differential pressure gauge. Model F701/F702 Specifications and Options

		700 Series Accessories Accessories include: Mounting Brackets - • Part No. SAF602-0572 for filters 1/4" to 1/2"; • Part No. SAF200AW57 for filters 3/4" (2 required) • Part No. SAF200CW57 for filters 1" (2 required). Differential Pressure Pop-Up Indicator DP375 - • Standard on Model F701 1/4", 3/8" and 1/2" port filters. • Increase in pressure drop will cause orange piston to rise. • A fully risen piston indicates the need to change filter element (12 psi differential). • Low cost method of monitoring pressure drop. • 360° visibility. Differential Pressure Gauge DP276WP - • Standard on Model F701 1¼"" through 2½" port filters. • Helps avoid contaminated air lines and poor equipment performance due to excessive pressure drop. • Easy to read dial face indicates pressure drop and need for filter element replacement. • Three color dial face. • Green: 0-3 PSI (clean) - Yellow: 4-8 PSI (change) - Red: (over 9 PSI (dirty) • Readable both sides. • Non pressurized dial face. Magnet operated • Low profile allows easy filter installation. • High quality material construction for durability. • Easily mounted in field using two brass bolts (included). Remote Differential Pressure Gauge DP277WP - • Convenient method of monitoring pressure drop on filter already installed. • Line mount • Readable both sides • 1/8: NPT female connections • Three color dial face Internal Auto Drain - • Recommended for use with particulate and coalescing filters. • Opens valve and drains bowl condensate only when necessary. • Unique protective dirt shield minimizes contaminants from effecting smooth float operation. • Maximum supply pressure: 250 PSIG. • Fits all F701/F702 filter housings. • Add suffix letter T to filter model number for SA702MD factory installed. For example: F702-02W9T External Auto Drains - • Discharge port is tapped ¼ NPT for condensate removal. • Push button for manual drain. • Large orifice prevents clogging. • Maximum supply pressure: 250 PSIG • Model SA602D for F701/F702-02E, -03E, -04E, -20E, -20L • Model SA603D for F701/F702-10E, -12E, -16E • Add suffix letter Q to filter model for external auto drain mounted. Example: F701-03EQ Electric Drain ED900 - Recommended for filters removing heavy liquid loads. • Includes manual override. • Large orifice 7/16" prevents clogging. • Adjustable Off Time: 1-45 minutes • Adjustable On Time: 1-45 seconds • Power On Indicating Light • Valve Open Indicating Light • Minimum Working Pressure: 3 psig • Maximum Working Pressure: 150 psig • Part No. ED900-02 - 1/4" NPT • Part No. ED900-04 - 1/2" NPT