are available from these manufacturers:

The Arrow Pneumatics manufactures two types of in-line hydraulic filters. These are for small, high pressure systems on the pressure side of the pump to prevent foreign particles of 25 microns and larger, such as those created by pump wear, from entering valves.
	Hydraulic In-Line Filter Arrow's hydraulic in-line filter provides protection for small, high pressure systems up to 3,000 psi. A sintered bronze element insures protection against crushing should dirt accumulate and increase pressure drop across the element. The unique construction features an anodized aluminum housing for light weight, and a conically shaped sintered bronze element positioned by a retaining spring to allow true, uninterrupted axial flow. Special viton O-rings are available for oil systems where chemical action may be a problem. The standard 25 micron bronze filter element can be easily cleaned or replaced. Nominal filtration ratings of 90, 40, or 10 microns are available. Maximum operating pressure is 3,000 psi. Operating temperatures are 35°F to 200°F. For viton O-rings, the operating temperatures are 35°F to 400°F. Part No. NPTF Overall Length Diameter Weight (lbs.) Element & Seal Spring Kit 9052 9053 9054 9056 9152 9153 1/4" 3/8" 1/2" 3/4" 9/16"-18 SAE 3/4"-16 SAE 3-1/4" 3-1/4" 4-15/16" 4-15/16" 3-1/4" 3-1/4" 1-1/2" .46 .46 .83 .83 .46 .46 EK9052 EK9052 EK9054 EK9054 EK9052 EK9052 SK9052 SK9052 SK9054 SK9054 SK9052 SK9052 Use suffix V for viton seals. For 90, 40, or 10 micron elements, use micron size as a dash number and add to part no., i.e., 9052-10, EK9052-10.
	Hydraulic In-Line Filter - Tee Type Arrow's hydraulic in-line filter provides protection for small, high pressure systems up to 5,000 psi. The design is similar in performance to the model 9052 and 9053 filters, with the added convenience of a cleanable element that can be removed without breaking line connections. A filter access cap simply unscrews for easy element cleaning and replacement. The anodized aluminum housing is light weight. Porting is 1/4" NPT, 3/8" NPT or 9/16"-18 SAE pipe. Special viton O-rings are available for oil systems where chemical action may be a problem. The standard 25 micron bronze filter element can be easily cleaned or replaced. Nominal filtration ratings of 90, 40, or 10 microns are available. Maximum operating pressure is 5,000 psi. Operating temperatures are 35°F to 200°F. For viton O-rings, the operating temperatures are 35°F to 400°F. Part No. NPTF Overall Length Diameter Weight (lbs.) Element & Seal Spring Kit 9052T 9053T 9152T 1/4" 3/8" 9/16"-18 SAE 3-3/16" 2-1/8" .93 EK9052 EK9052 EK9052 SK9052T SK9052T SK9052T Use suffix V for viton seals. For 90, 40, or 10 micron elements, use micron size as a dash number and add to part no., i.e., 9052T-10, EK9052-10.

	Spin-On Filters - In-Line
		20 Series The 20 Series Single Adapter accepts the 20 Series Standard and Extended Length Filters. The adapter is made of die-cast aluminum with standard 3/4" NPT or 1-1/16"-12 SAE inlet/outlet ports. Consult the factory for BSP threads. 1/8" NPT gauge ports are optional. Gauge port locations are located in four places on the head. Vacuum or pressure gauges are sold separate. Adapters assembled with pressure differential indicators on the right of the inlet are available as a complete unit. By-pass valves are optional with 3 psi for suction line applications or 25 psi for return line applications. Consult factory for additional by-pass valve values. ORDERING INFORMATION Part Number Thread Gauge Ports By-Pass Valve Indicator 50205 50182 NPT NO YES NO NO 50183 50184 NPT NO YES 3-5 psi Suction Line NO 50185 50186 NPT NO YES 25 psi Return Line NO 50214 50215 SAE NO YES NO NO 50216 50217 SAE NO YES 3-5 psi Suction Line NO 50218 50219 SAE NO YES 25 psi Return Line NO 50260 50299 NPT SAE NO NO YES
		40-A Series The 40-A Series Single Adapter accepts the 40 Series Standard and Extended Length Filters. The adapter is made of die-cast aluminum with standard 1" NPT or 15/16"-12 SAE inlet/outlet ports. Consult the factory for BSP threads. 1/8" NPT gauge ports are optional. Gauge port locations are located in four places on the head. Vacuum or pressure gauges are sold separate. Adapters assembled with pressure differential indicators on the right of the inlet are available as a complete unit. By-pass valves are optional with 3 psi for suction line applications or 25 psi for return line applications. Consult factory for additional by-pass valve values. ORDERING INFORMATION Part Number Thread Gauge Ports By-Pass Valve Indicator 50114 50110 50111 NPT NO YES NO NO NO NO YES 50112 50113 NPT NO YES 3-5 psi Suction Line NO 50115 50116 50117 NPT NO YES NO 25 psi Return Line NO NO YES 50187 50188 50189 SAE NO YES NO NO NO NO YES 50190 50191 SAE NO YES 3-5 psi Suction Line NO 50193 50194 50195 SAE NO YES NO 25 psi Return Line NO NO YES
		40-B Series The 40-B Series Single Adapter accepts the 40 Series Standard and Extended Length Filters. The adapter is made of die-cast aluminum with standard 1-1/4" NPT or 1-5/8"-12 SAE inlet/outlet ports. Consult the factory for BSP threads. 1/8" NPT gauge ports are optional. Gauge port locations are located in four places on the head. Vacuum or pressure gauges are sold separate. Adapters assembled with pressure differential indicators on the right of the inlet are available as a complete unit. By-pass valves are optional with 3 psi for suction line applications or 25 psi for return line applications. Consult factory for additional by-pass valve values. ORDERING INFORMATION Part Number Thread Gauge Ports By-Pass Valve Indicator 50136 50137 50138 NPT NO YES NO NO NO NO YES 50139 50140 NPT NO YES 3-5 psi Suction Line NO 50142 50143 50144 NPT NO YES NO 25 psi Return Line NO NO YES 50196 50197 50198 SAE NO YES NO NO NO NO YES 50199 50200 SAE NO YES 3-5 psi Suction Line NO 50202 50203 50204 SAE NO YES NO 25 psi Return Line NO NO YES
		40-C Series The 40-C Series Single Adapter accepts the 40 Series Standard and Extended Length Filters. The adapter is made of die-cast aluminum with standard 1-1/2" NPT inlet/outlet ports. Consult the factory for BSP threads. 1/8" NPT gauge ports are optional. Gauge port locations are located in four places on the head. Vacuum or pressure gauges are sold separate. Adapters assembled with pressure differential indicators on the right of the inlet are available as a complete unit. By-pass valves are optional with 3 psi for suction line applications or 25 psi for return line applications. Consult factory for additional by-pass valve values. ORDERING INFORMATION Part Number Thread Gauge Ports By-Pass Valve Indicator 50123 50164 50165 NPT NO YES NO NO NO NO YES 50166 50167 NPT NO YES 3-5 psi Suction Line NO 50169 50170 50171 NPT NO YES NO 25 psi Return Line NO NO YES

[ Flo-Products Home ]   [ Hydraulic Products ] [ Hydraulic Filters - Page 2 ]

If you are located in Missouri, Kansas, Nebraska, or Illinois, you may contact us at the following
telephone and fax numbers with your requests or questions:
St. Louis telephone 314.428.4000 fax 314.428.4097
Kansas City telephone 913.829.5900 fax 913.829.0815
 
For ALL OTHER AREAS Please use the Info Request form for specific product information, pricing or other information.
Please include company name, contact name, address, phone number and fax number to ensure a timely response.
 
Send e-mail to webmaster@flo-products.com with questions or comments about this web site.
Copyright © 2004 Flo-Products Company
Last modified: