[Flo-Products Company Logo]
nav buttons
Hydraulic Filter Elements

are available from these manufacturers:
Arrow Pneumatics Cim-Tek Hydac Technology Corp.
Hy-Pro Filters, Inc. Lenz, Inc. MP Filtri, Inc.
  PTI Filter  

 

PTI Technologies
PTI filter elements are available with four distinct types of media.
The Micronic Element is a resin impregnated cellulosic fiber construction that contains semi-depth pleating and high temperature curing. This curing transforms the basic structure into a durable heat-shock and chemical-resistant filter medium. The filtration efficiency of this low cost element is unmatched by others of comparable cost. They are ideal for high volume, high efficiency applications where peak performance is as important as budget considerations.
 
The Glas-Tech IITM filter media is our most advanced element available. This multi-layer construction utilizes a resin impregnated micro-fiberglass media that provides improved efficiencies, lower clean pressure drop, higher dirt holding capacities, and is more cost effective than our cellulosic fiber (Micronic) construction. These elements are available in 3, 6, 13 and 23 micrometer removal ratings where Βx = 200. They are also available in 75, 150, 300 and 3000 PSID collapse ratings.
 
The Wire Cloth Element is a pleating of extremely fine wire stainless steel wires with precisely formed pores, or by compressing and sintering webs of stainless steel fibers randomly laid into a three-dimensional labyrinth structure. This type of construction prevents all solid particles larger than a specific dimension (the absolute rating), from passing through. A major feature of wire cloth elements is that they can be cleaned and reused a number of times before replacement is necessary, depending upon service conditions.
 
The Posipore Element is a dual stage filter medium that contains the micronic media as the outer stage for greater dirt holding capacity, and a cylindrical inner stage of stainless steel wire mesh for absolute particle size control. Posipore elements come with a dual rating expressing the inner and outer particle sizes. Element collapse is rated at either 300 or 4500 PSID.

 
bullet

Low Pressure Filter Elements
  bullet

Series FBG

These filter elements are available as 3, 10 & 25 micron cellulose, and Β3, Β6, & Β23 Glas-Tech IITM micro fiber elements. It has a flow capability of 15 GPM and a collapse rating of 75 PSID.
 
  bullet

Series FHD/FJD

These filter elements are available as 3, 10 & 25 micron cellulose, and Β3, Β6, Β13, & Β23 Glas-Tech IITM micro fiber elements. It has a flow capability of 40 or 80 GPM and a collapse rating of 75 PSID. Series FHD also has available a Posipore 5/15 element with a collapse rating of 300 PSID.
 
  bullet

F1F Series

These are constructed of light-weight aluminum, rated for 350 PSI service and flows to 50 GPM. The threaded head-to-bowl connections makes element servicing quick and easy. The F1F series is available with SAE straight thread ports, bypass and visual or visual/electrical ΔP devices.
 
  bullet

F8G Series

This series is rated for flows to 300 GPM and pressures to 400 PSI. The design of this series provides quick element change capabilities, 25 or 50 PSI differential bypass valve options - Glas-Tech IITM elements with 3, 6, 12 or 23 micron removal ratings where Βx = 200 plus water removal elements - visual and/or electrical ΔP options. The F8G series is ideal for flushing carts and stationary recirculating systems because of the high dirt holding capacity elements.
 
bullet

Medium-High Pressure Filter Elements
  bullet

F2P Series

These filters are rated for 6000 PSI continuous service and for flows to 150 GPM. Valve options include bypass, non-bypass and reverse flow valve for bi-directional systems. Port sizes from 3/4" to 1-1/2" are available in SAE straight thread and 3000 or 6000 PSI SAE 4-bolt flange styles. Model F2P -081 also conforms to the AIAG Automotive Standard (HF3).
 
  bullet

Series F1L

These filter elements are available as 3, 10 & 25 micron cellulose, and Β3, Β6, & Β23 Glas-Tech IITM micro fiber elements. It has a flow capability of 25 GPM and a collapse rating of 75 PSID.
 
bullet

Spin-On Filter Elements
  bullet

Series F5D

These filter elements are available as 3, 10 & 25 micron cellulose elements for the 15, 25 & 50 GPM size filters.
 
  bullet

Series F4E

These filter elements are available as 3, 10 & 25 micron cellulose, and 10 & 25 micron water removal elements for the 30 & 40 GPM size filters. Series F4E filter elements are available as 3, 10 & 25 micron cellulose, Β3, Β10, & Β23 Glas-Tech IITM micro fiber and 10 & 25 micron water removal elements for the 50 & 70 GPM size filters. It has a collapse rating of 75 PSID. Seals are either Buna N or Viton.
 
  bullet

Series F4F

These filter elements are available as 3, 10 & 25 micron cellulose, and Β3, Β6, & Β23 Glas-Tech IITM micro fiber elements for the 30 & 40 GPM size filters. It has a collapse rating of 75 PSID. Seals are either Buna N or Viton.
 
  bullet

Series F4E/F4F

These Spin-On Filter Elements also may be used as Air Breathers. Utilizing the Glas-Tech IITM micro fiber elements, air contamination may be controlled down to 0.25 micron levels. Uses the standard 1-1/2" - 16UN-2A attachment plates. An adapter can be used to mount the filter element on a 1" diameter pipe mounted on a reservoir.
 
bullet

Suction Filter Elements
  bullet

Series F4S

These filter elements are available as a 40 micron synthetic material element. It has a flow capability of 50 GPM and a collapse rating of 75 PSID. Seals are either Buna N or Viton.
 
bullet

Duplex Filter Elements
  bullet

F7F Series

These duplex assemblies, with integral transfer valve, are designed to provide continuous filtration for those critical applications where system operation cannot be interrupted, even for element change-out. These duplex filters are rated for 350 PSI service, flows to 100 GPM and have 1-1/2" SAE straight thread or 3000 PSI 4-bolt flange port styles. The "081" model also conforms to the AIAG Automotive Standard HF3.
 
  bullet

F7L Series

These duplex assemblies, with integral transfer valve, are designed to provide continuous filtration for those critical applications where system operation cannot be interrupted, even for element change-out. These duplex filters are rated for 2400 PSI service, flows to 100 GPM and have 1-7/8" SAE straight thread or 3000 PSI 4-bolt flange port styles. The "081" model also conforms to the AIAG Automotive Standard HF3.
 
  bullet

F7G Series

These duplex assemblies, with integral transfer valve, are designed to provide continuous filtration for those critical applications where system operation cannot be interrupted, even for element replacement. These duplex systems are rated for 150 PSI service and 600 GPM flow. 4" ANSI flange ports are standard. Bypass valve is available with 25 or 50 PSId cracking as standard as well as vent and drain ports. Optional visual and electrical ΔP devices are available with 18 or 32 psid actuation.
 
bullet

Specialty Filter Elements
  bullet

Series CU-1100

These filter elements are available as 3, 10 & 25 micron cellulose, Β3, Β6, Β13, & Β23 Glas-Tech IITM micro fiber elements and 74 & 149 micron wire mesh elements. These has a collapse rating of 75 PSID.
 
  bullet

Series HF3

These filter elements (meets AIAG Automotive Standards) are available as Β3, Β6, Β13, & Β23 Glas-Tech IITM micro fiber elements for the 30 & 50 GPM size filters. These have a collapse rating of 150 PSID. Series HF3 filter elements are available as Β3 & Β13 Glas-Tech IITM micro fiber elements for the 30 & 50 GPM size filters. These have a collapse rating of 3000 PSID. Seals are either Buna N or Viton.
 
  bullet

Series HF4

These filter elements (meets AIAG Automotive Standards) are available as 3, 10 & 25 micron cellulose elements, and 74 & 149 micron wire mesh elements for the 70 & 100 GPM size filters. These has a collapse rating of 75 PSID. Series HF4 filter elements are available as Β3, Β6, Β13, & Β23 Glas-Tech IITM micro fiber elements for the 70 & 100 GPM size filters. These have a collapse rating of 150 PSID. Seals are either Buna N or Viton.
 
  bullet

Series P83

These filter elements are available as a 10 micron water removal element, and Β3, Β6, Β13, & Β23 Glas-Tech IITM micro fiber elements. It has a flow capability of 100, 150 or 250 GPM and a collapse rating of 150 PSID. Seals are either Buna N or Viton.
 
  bullet

Series RP83

These filter elements feature a replaceable pleat pack. When removed from the center tube assembly, the used pleat pack can be reduced to 1/5 the volume of a standard element. The reusable center tube assembly (CTA) is available in two models, zinc plated and electroless nickel plated, and in two lengths. End caps are made of reinforced polymer. Maximum operating temperature is 225°F. Replacement pleat packs are available as Β3, Β6, Β13, & Β23 Glas-Tech IITM micro fiber elements. It has a flow capability of 150 or 250 GPM and a collapse rating of 150 PSID. Seals are either Buna N or Viton.
 
  bullet

Series DP83

These filter elements feature extra deep pleats that have 2.35 times the normal dirt holding capacity. End caps and center tube are plated steel. Filter elements are available in three lengths. Deep pleat elements are available as Β3, Β6, Β13, & Β23 Glas-Tech IITM micro fiber elements. It has a flow capability of 100, 150 or 250 GPM and a collapse rating of 150 PSID. Seals are either Buna N or Viton.
 
  bullet

Series PG

These filter elements are available as 10 & 25 micron cellulose, and Β3, Β6, Β13, & Β23 Glas-Tech IITM micro fiber elements. It has a flow capability of 15, 25, 30, 50, 80 or 120 GPM and a collapse rating of either 300 or 3000 PSID. Also available are a 10 micron water removal element and a 149 micron wire mesh element in the 50, 80, & 120 GPM rating with a collapse rating of 300 PSID. Seals are either Buna N or Viton.
 
  bullet

Series CanAbsorb IITM

These filter elements utilize a highly absorbent copolymer medium that has an affinity for water. Due to the use of upstream and downstream epoxy coated carbon steel mesh, the water absorbing polymer maintains its integrity even as free and emulsified water are bonded in the medium. Elements come in either a 10 or 25 micron size.
 
  bullet

Series AN-6235

These filter elements are available in 4 sizes.
Size 1A is available as 2, 10 & 25 micron cellulose, and 2/10 micron Posipore elements. It has a flow capability of 0.5 GPM and a collapse rating of 150 and 300 PSID respectively.
Size 2A is available as 2, 10 & 25 micron cellulose, and 2/10, 5/15 & 10/20 micron Posipore elements. It has a flow capability of 3 GPM and a collapse rating of 150 and 300 PSID respectively.
Size 3A is available as 2, 10 & 25 micron cellulose, and 2/10, 5/15 & 10/20 micron Posipore elements. It has a flow capability of 6 GPM and a collapse rating of 150 and 300 PSID respectively.
Size 4A is available as 2, 10 & 25 micron cellulose, 2/10, 5/15 & 10/20 micron Posipore, and 5/15 & 10/25 wire cloth elements. It has a flow capability of 12 GPM and a collapse rating of 150, 300 and 300 PSID respectively.
Size 4A is also available as a Β3, Β6, & Β23 Glas-Tech IITM micro fiber elements with a collapse rating of 200 PSID, and as Β2.8, & Β17 Glas-Tech IITM micro fiber elements with a collapse rating of 3000 PSID. The Posipore is also available in 2/10, 5/15 & 10/20 micron elements with a collapse rating of 4500 PSID. Seals are either Buna N or Viton.
 
  bullet

Series AN-6236

These filter elements are available in 3 sizes.
Size 1 is available as 2, & 10 micron cellulose, and 2/10, 5/15 & 10/20 micron Posipore elements. It has a flow capability of 12 GPM and a collapse rating of 75 and 300 PSID respectively.
Size 2 is available as 2, & 10 micron cellulose, and 2/10, 5/15 & 10/20 micron Posipore elements. It has a flow capability of 24 GPM and a collapse rating of 75 and 300 PSID respectively.
Size 3 is available as 2, 10 & 25 micron cellulose, 2/10, 5/15 & 10/20 micron Posipore, Β3, Β8, & Β23 Glas-Tech IITM micro fiber and 10/25 wire cloth elements. It has a flow capability of 48 GPM and a collapse rating of 75, 75, 300, and 300 PSID respectively.

 
[ home Flo-Products Home ]   [ back 2 levels Hydraulic Products ]
[ back 1 level Filter Elements - Page 3 ]
If you are located in Missouri, Kansas, Nebraska, or Illinois, you may contact us at the
following telephone and fax numbers with your requests or questions:
St. Louis telephone 314.428.4000 fax 314.428.4097
Kansas City telephone 913.829.5900 fax 913.829.0815
 
For ALL OTHER AREAS Please use the Info Request form for specific product information, pricing or other information.
Please include company name, contact name, address, phone number and fax number to ensure a timely response.
 
Send e-mail to webmaster@flo-products.com with questions or comments about this web site.
Copyright © 2004 Flo-Products Company
Last modified: