[Flo-Products Company Logo]
 

Canfield Connector

Connectors

Series R5000 Rectified Connectors

Canfield Connector's R5000 Series are solenoid valve connectors incorporate full-wave bridge rectifiers inside the DIN 43650 form "A" ISO and MINI connectors. This standard permits industry interchangeability and has been embraced by the solenoid valve industry world-wide. The R5000 converts alternating current to direct current which gives the user an advantage of no coil burnout due to valve sticking creating a high inrush. Also direct current eliminates AC "hum" inherent to alternating current. Features include the ability for the user to wire the connector into existing installations or order the connector prewired at the factory. Wire connections are made inside the connector housing and the wire inlet is either PG9 strain relief, 3/8" or 1/2" conduit. The R5000 has a maximum current rating of 1 amp continuous with maximum wire gauge diameter of 14 AWG. An indicator light is offered for instant diagnostics and to aid setup and installation.

 
Technical Data
Color: Black or translucent for lighted styles
Recommended cable diameter: PG9 - .230 to .310 inches max.
PG11 - .310 to .400 inches max.
3/8" Conduit - .410 inches max.
1/2" Conduit - .410 inches max.
Wire gauge max.: 14 AWG
Voltage max.: 250 VAC 50/60 Hz
Voltage drop: 2.2 volt max.
Current maximum: Continuous - 1 Amps
Inrush - 15 Amps for 15 ms
Environmental protection: NEMA type 4 and IP65 dust tight and water resistant
Maximum rated temperature for gaskets: Nitrile gasket -25° to 90° C
Silicone gasket -40° to 125° C

 
R5 1 6 3 - 2 03 00 07 Series R5000 connector; ground down; 6 ft. wire length; 6-48 VAC 50/60 Hz operating voltage, translucent housing; silicone gasket; MINI 1/2" conduit connector; standard for connector type 03 cable.
  |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|		 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|		 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|		 - |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|		 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|		 00 +
00
 
01
02
03
04
05
06
07
 
08
09
 
10
11
12
13
 
15
16
17
19
22
24
25
28
 
29
33
36
75
76
77		 Wire Type (Additional charge unless marked no cost)
Gray PVC cable (Standard for PG9) (black/white/green) (no cost) unwired or standard for connector types 01 & 08
Yellow STO cable for PG9 (black,white,green)
Black SJO cable for PG9 (black/white/green) (no cost)
Yellow Thermoset SSOO cable for PG11 (black/white/green)
Yellow Neoprene SOWA cable for PG11 (black/white/green)
Black Neoprene SO cable for PG11 (black/white/green)
Black rubber SV cable for PG9 (black/white/green)
Black/white/green TEW hook-up (Any MINI/ISO Conduit) (no cost) standard for connector types 02, 03 & 10
Black/white TEW hook-up (Any MINI/ISO Conduit)
Gray PVC cable (Standard for PG11) (black/white/green) (no cost) standard for connector type 09
Grey PVC SJTO cable for PG11 (black/white/green)
Gray PVC cable for PG7 (Standard) (Black/white/green) (no cost)
Black/red TEW hook-up (Any MINI/ISO Conduit)
Black PVC parallel black cordset (6ft.) for PG9 (black/white/green-yellow)
Black SJT tandem blade cordset (6ft.) (black/white/green-yellow)
Gray PVC cable for PG7 (red/black)
Gray PVC cable for PG7 (black/white)
Grey PVC cable for PG7 (red/black)
Black/white TEW hook-up (Any MINI/ISO Conduit)
Yellow PVC STO cable for PG11 (black/white/green)
Black rubber SJ/SJO cable for PG11 (black/white/red/green)
Black PVC parallel black cordset (2ft.) for PG9 (black/white/green-yellow)
Black PVC cable for PG9 (black/white/green-yellow)
Red/Black TEW for Sub-Micro conduit
Black/White/Green TEW for Sub-Micro Conduit (no cost)
Gray PVC cable for PG9 (black/white/red/green)
Black/white/red/green TEW for ISO conduit
Black/white/red/green TEW cable for Sub-Micro conduit
  |
|
|
|
|
|
|		 |
|
|
|
|
|
|		 |
|
|
|
|
|
|		 - |
|
|
|
|
|
|		 +
01
02
03
08
09
10
11
12
13
18
19
20		 Connector Types
MINI strain relief PG9
MINI 3/8" conduit
MINI 1/2" Conduit
ISO strain relief PG9
ISO strain relief PG11
ISO 1/2" Conduit
MINI High Top strain relief PG9
MINI High Top 3/8" conduit
MINI High Top 1/2" Conduit
ISO High Top strain relief PG9
ISO High Top strain relief PG11
ISO High Top 1/2" Conduit
  |
|
|
|		 |
|
|
|		 |
|
|
|		 - +
1
2
3		 Gasket
Nitrile
Silicone
Nitrile profile
  |
|
|
|		 |
|
|
|		 +
0
3
7		 Operating Voltage
Unlighted (black housing)
6 - 48VAC 50/60 Hz (translucent housing)
100 - 240 VAC 50/60 Hz (translucent housing)
  |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|		 +
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
G
H
I
J
K
L
M
N
P
Q
R		 Wire Length
Unwired (standard)
1 ft.
2 ft.
3 ft. (standard)
4 ft.
5 ft.
6 ft. (standard)
7 ft.
8 ft.
9 ft. (standard)
10 ft.
11 ft.
12 ft. (standard)
13 ft.
14 ft.
15 ft.
16 ft.
17 ft.
18 ft.
19 ft.
20 ft.
25 ft.
30 ft.
35 ft.
40 ft.
45 ft.
50 ft.
  +
1
2
3
4		 Orientation
Ground down
Ground right (Not available in MINI type connectors)
Ground up
Ground left (Not available in MINI type connectors)

 
If you are located in Missouri, Kansas, Nebraska, or Illinois, you may contact us at the following telephone and fax numbers with your requests or questions:
St. Louis telephone 314.428.4000 fax 314.428.4097
Kansas City telephone 913.829.5900 fax 913.829.0815
 
For ALL OTHER AREAS Please use the Info Request form for specific product information, pricing or other information. Please include company name, contact name, address, phone number and fax number to ensure a timely response.
 
Send e-mail to webmaster@flo-products.com with questions or comments about this web site.
Copyright © 2003 Flo-Products Company
Last modified:
Brochure: A56-1000 Rev. 03 2/02