[Flo-Products Company Logo]
 

Canfield Connector

Connectors

Series P5600 Micro Protective Connector (MPC)

The Micro Protective Connectors are available in standard MINI, DIN 43650/ISO 4400 Form "A" and Sub-Micro 8mm/DIN 43650 Form "C" and 9mm. The Canfield Connector MPCs provide electrical controllers surge suppression against voltage spikes caused by the solenoids used on hydraulic and pneumatic solenoid valves. Advantages of suppression are:
  • Ideal for use with Reed Switch Proximity Sensor.
  • Reduce contact burnoff, increasing switch life.
  • High frequency interference pulses reduced, lowering electronic noise.
  • Protect programmable controllers and other types of electronic devices from inductive spikes.
  • Addition of external modules or hardware is not required.
  • Most suppression systems are available with standard connectors.
There are 5 circuit types available:
MPC Type 1 - Most commonly used in DC applications.
Diode in parallel with coil. When switch is opened, the energy stored in the coil is trapped and dissipated by the diode.
  • Increases drop out time
  • Works only with DC voltage
  • Polarity dependent
  • Supply and switch are protected
MPC Type 2
Diode & Zener in parallel with coil. When switch is opened, the energy stored in the coil is trapped and dissipated by the diode and zener diode and the coil resistance..
  • Exact limitation of inductive spikes
  • Works only with DC voltage
  • Polarity dependent
  • Supply and switch are protected
MPC Type 3
Transorb in parallel with coil. When switch is opened or closed, the energy stored in the coil is limited by the transorb.
  • Good drop out time
  • Works with AC or DC voltage
  • NOT polarity dependent
  • Coil, supply and switch are protected
MPC Type 5 - Most commonly used in AC applications.
MOV (metal oxide varistor) in parallel with coil. When switch is opened or closed, the energy stored in the coil is limited by the MOV.
  • Good drop out time
  • Works with AC or DC voltage
  • NOT polarity dependent
  • Coil, supply and switch are protected
MPC Type 6
RC network in parallel with coil. When switch is opened or closed, the energy stored in the coil is absorbed by the capacitor and dissipated by the resistor.
  • Good drop out time
  • Works with AC or DC voltage
  • NOT polarity dependent
  • Coil, supply and switch are protected
Technical Data
Color: Black, gray or translucent for lighted styles
Recommended cable diameter: PG7 - .120 to .240 inches max.
PG9 - .240 to .310 inches max.
PG11 - .310 to .400 inches max.
1/2" Conduit - .410 inches max. for MINI & ISO
1/2" Conduit - .250 inches max. for Sub-Micro
Wire gauge max.: ISO - 14 AWG
MINI - 14 AWG
Sub-Micro - 20 AWG
Rated voltage max.: 120 VDC / 240 VAC 50/60 Hz
Current maximum: ISO - 10 Amps
MINI - 10 Amps
Sub-Micro - 6 Amps
Environmental protection: NEMA type 4 and IP65 dust tight and water resistant
Maximum rated temperature for gaskets: Nitrile gasket -25° to 90° C
Silicone gasket -40° to 125° C
MINI body common dimensions: Width 21mm, length 27mm
Mini overall length: PG9 46.2mm
3/8" NPTF 58mm
1/2" NPTF 44mm
ISO body dimensions: Width 26.5mm, body length 26.5mm, total length 40mm
Sub-Micro body dimensions: Width 16mm, length 16mm
Sub-Micro overall length: PG7 37mm
1/2" NPTF 47mm
Contact spacing: Standard MINI 11mm
ISO DIN 43650 Form "A" 18mm
Sub-Micro DIN 43650 Form "C" 8mm (Ground space offset by 0.2mm toward pin 1)
Sub-Micro 9.4mm

 
P5 1 6 4 - 2 5 2 1 0 07 Series P5600 connector; ground down; 6 ft. wire length; 120-240 VAC 50/60 Hz operating voltage; silicone gasket; MINI 1/2" conduit connector; Diode & Zener Diode MPC circuit; Lighted (translucent housing); standard translucent housing color; standard for connector type 4, 5 & 8 cable.
  |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|		 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|		 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|		 - |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|		 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|		 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|		 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|		 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|		 +
00
 
01
02
03
04
05
06
07
 
08
09
 
10
11
 
12
13
 
15
 
16
17
19
22
24
25
28
 
29
33
36
 
75
76
77		 Wire Type (Additional charge unless marked no cost)
Gray PVC cable (Standard for PG9) (black/white/green) (no cost) unwired or standard for connector types 0. 3 & 6
Yellow STO cable for PG9 (black,white,green)
Black SJO cable for PG9 (black/white/green) (no cost)
Yellow Thermoset SSOO cable for PG11 (black/white/green)
Yellow Neoprene SOWA cable for PG11 (black/white/green)
Black Neoprene SO cable for PG11 (black/white/green)
Black rubber SV cable for PG9 (black/white/green)
Black/white/green TEW hook-up (Any MINI/ISO Conduit) (no cost) standard for connector types 1, 2, 4, 5 & 8
Black/white TEW hook-up (Any MINI/ISO Conduit)
Gray PVC cable (Standard for PG11) (black/white/green) (no cost) standard for connector type 7
Grey PVC SJTO cable for PG11 (black/white/green)
Gray PVC cable for PG7 (Standard) (Black/white/green) (no cost) standard for connector types 9 & B
Black/red TEW hook-up (Any MINI/ISO Conduit)
Black PVC parallel black cordset (6ft.) for PG9 (black/white/green-yellow)
Black SJT tandem blade cordset (6ft.) (black/white/green-yellow)
Gray PVC cable for PG7 (red/black)
Gray PVC cable for PG7 (black/white)
Grey PVC cable for PG7 (red/black)
Black/white TEW hook-up (Any MINI/ISO Conduit)
Yellow PVC STO cable for PG11 (black/white/green)
Black rubber SJ/SJO cable for PG11 (black/white/red/green)
Black PVC parallel black cordset (2ft.) for PG9 (black/white/green-yellow)
Black PVC cable for PG9 (black/white/green-yellow)
Red/Black TEW for Sub-Micro conduit
Black/White/Green TEW for Sub-Micro Conduit (no cost) standard for connector types A & C
Gray PVC cable for PG9 (black/white/red/green)
Black/white/red/green TEW for ISO conduit
Black/white/red/green TEW cable for Sub-Micro conduit
  |
|
|		 |
|
|		 |
|
|		 - |
|
|		 |
|
|		 |
|
|		 |
|
|		 +
0
1		 Housing Color
Standard. translucent
Gray "A"
  |
|
|		 |
|
|		 |
|
|		 - |
|
|		 |
|
|		 |
|
|		 +
0
1		 Lighting Specifications
Unlighted
Lighted (translucent housing)
  |
|
|
|
|
|		 |
|
|
|
|
|		 |
|
|
|
|
|		 - |
|
|
|
|
|		 |
|
|
|
|
|		 +
1
2
3
5
6		 MPC Circuit
Diode (DC only)
Diode & Zener Diode (DC only)
Transorb (AC/DC) Not available for 120-240 VAC 50/60 Hz
MOV (AC/DC)
RC Network (AC/DC)
  |
|
|
|
|
|
|
|
|
|
|		 |
|
|
|
|
|
|
|
|
|
|		 |
|
|
|
|
|
|
|
|
|
|		 - |
|
|
|
|
|
|
|
|
|
|		 +
3
4
5
6
7
8
B
C
D
E		 Connector Types
MINI DIN B strain relief PG9
MINI DIN B 3/8" conduit
MINI DIN B 1/2" Conduit
MINI strain relief PG9
MINI 3/8" conduit
MINI 1/2" Conduit
ISO strain relief PG9
ISO strain relief PG11
ISO 1/2" Conduit
Sub-Micro strain relief PG7 (9.4mm) (MPC Circuits 1 & 5)
Sub-Micro 1/2" Conduit (9.4mm) (MPC Circuits 1 & 5)
Sub-Micro strain relief PG7 (8mm) (MPC Circuits 1 & 5)
Sub-Micro 1/2" Conduit (8mm) (MPC Circuits 1 & 5)
  |
|
|
|		 |
|
|
|		 |
|
|
|		 - +
1
2
3		 Gasket
Nitrile
Silicone
Nitrile profile (N/A Sub-Micro)
  |
|
|
|
|
|		 |
|
|
|
|
|		 +
3
4
5
6
7		 Operating Voltage
6 - 48 VDC
48 - 120 VDC
6 - 48VAC 50/60 Hz
48 - 120VAC 50/60 Hz
120 - 240 VAC 50/60 Hz
  |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|		 +
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
G
H
I
J
K
L
M
N
P
Q
R		 Wire Length
Unwired (standard)
1 ft.
2 ft.
3 ft. (standard)
4 ft.
5 ft.
6 ft. (standard)
7 ft.
8 ft.
9 ft. (standard)
10 ft.
11 ft.
12 ft.
13 ft.
14 ft.
15 ft.
16 ft.
17 ft.
18 ft.
19 ft.
20 ft.
25 ft.
30 ft.
35 ft.
40 ft.
45 ft.
50 ft.
  +
1
2
3
4		 Orientation
Ground down
Ground right (Not available in MINI type connectors)
Ground up
Ground left (Not available in MINI type connectors)

 
If you are located in Missouri, Kansas, Nebraska, or Illinois, you may contact us at the following telephone and fax numbers with your requests or questions:
St. Louis telephone 314.428.4000 fax 314.428.4097
Kansas City telephone 913.829.5900 fax 913.829.0815
 
For ALL OTHER AREAS Please use the Info Request form for specific product information, pricing or other information. Please include company name, contact name, address, phone number and fax number to ensure a timely response.
 
Send e-mail to webmaster@flo-products.com with questions or comments about this web site.
Copyright © 2003 Flo-Products Company
Last modified:
Brochure: A56-1000 Rev. 03 2/02