Series M5 Male ConnectorsCanfield Male Connectors are used as electrical quick disconnect interfaces for pneumatic and hydraulic valves and sensors. They are available in standard MINI, DIN 43650 / ISO 4400 form "A" and "B", Sub Micro 8mm, and conduit arrangements. Some Male Connectors are available with 2 + ground or 3 + ground terminal options. Available formats are:
- A10620 MINI Female to ISO Male Adapter
- The MINI female to ISO male connector is used to adapt existing ISO connector to MINI coil installations. Connection is very simple and retrofit in the field is accomplished in minutes. The standard ISO female connector connects to the male connection.
Features are:
- ISO DIN 43650 Male to MINI female
- Male/female central screw
- 2+ Ground version only
- 250 VAC/VDC Max.
- 10 Amps max. rating
- Glass fiber reinforced nylon
- Nitrile gasket
- Temp. rating -25° to 90° C
- M03010 MINI Male for Molding
- This MINI Male Connector is used as an electrical quick connect. It is generally applied during the molding, potting, or epoxying process for pneumatic and hydraulic valves or pressure switches. The M03110 Male Connector is built to mate with the Series 5000 or other standard MINI female connectors.
Features are:
- 2+ Ground terminals
- 250 VAC/VDC Max.
- 10 Amps max. rating
- Glass fiber reinforced nylon
- Temp. rating -40° to 125° C
- M03110 MINI Male for Plate Mounting
- This MINI Male Connector is used as an electrical quick connect for pneumatic and hydraulic valves. The M03110 Male Connector is built to mate with the Series 5000 or other standard MINI female connectors. This connector can be used for mounting on a plate, panel or bulkhead.
Features are:
- 2+ Ground terminals
- 250 VAC/VDC Max.
- 10 Amps max. rating
- Glass fiber reinforced nylon
- Nitrile gasket standard
- Temp. rating -25° to 90° C
- P10020 ISO Male for Molding
- This Male DIN 43650/ISO 4400 Connector can be integrated in tooling to provide a cost effective quick connect electrical interface. The P10020 is designed to mate with Series 5000 or other DIN 43650/ISO 4400 female electrical connectors.
Features are:
- DIN 43650 Form "A" / ISO 4400 configuration
- 2+ or 3+ Ground versions
- 250 VAC/VDC Max.
- 10 Amps max. rating
- Glass fiber reinforced nylon
- Glass fiber reinforced nylon
- Temp. rating -40° to 125° C
- P10121 ISO Male for 2 Hole Plate Mounting
- This plate mount DIN 43650/ISO 4400 Male Connector is offered in either 2+ or 3+ ground versions. Easily installed using the template in the dimensional data. The P10121 connector is designed to mate with Series 5000 or other DIN 43650/ISO 4400 female connectors.
Features are:
- DIN 43650 Form "A"/ISO 4400 Configuration
- 2+ or 3+ Ground terminals
- 250 VAC/VDC Max.
- 10 Amps max. rating
- Glass fiber reinforced nylon
- Glass fiber reinforced nylon
- Nitrile gasket
- Temp. rating -25° to 90° C
- Panel mounting screws provided
- P10122 ISO Male for 4 Hole Plate Mounting
- This plate mount DIN 43650/ISO 4400 Male Connector is offered in either 2+ or 3+ ground versions. Easy to install using the template in the dimensional data. The P10122 connector is designed to mate with Series 5000 or other DIN 43650/ISO 4400 female connectors.
Features are:
- DIN 43650 Form "A"/ISO 4400 Configuration
- 2+ or 3+ Ground versions
- 250 VAC/VDC Max.
- 10 Amps max. rating
- Glass fiber reinforced nylon
- Glass fiber reinforced nylon
- Nitrile gasket
- Temp. rating -25° to 90° C
- For high vibration, mobile applications
- Panel mounting screws provided
- P10222 ISO Male for Sheet Metal Mounting
- This DIN 43650/ISO 4400 Male Connector is specifically designed for mounting in sheet metal. It has an arc over insulating plastic ridge and includes a gasket and four mounting screws. The P10222 connector is designed to mate with Series 5000 or other DIN 43650/ISO 4400 female connectors.
Features are:
- DIN 43650 Form "A"/ISO 4400 Configuration
- 2+ or 3+ Ground versions
- 250 VAC/VDC Max.
- 10 Amps max. rating
- Glass fiber reinforced nylon
- Nitrile gasket
- Temp. rating -25° to 90° C
- P10500 ISO Male for 1/2" Conduit Male Thread
- This Male DIN 43650/ISO 4400 Connector is specifically designed to attach to systems with 1/2" conduit connections and mate with Series 5000 or other DIN 43650/ISO 4400 female connectors. These units are pre-wired for ease of installation and epoxy encapsulated in an aluminum shell.
Features are:
- DIN 43650 Form "A"/ISO 4400 Configuration
- 2+ or 3+ Ground terminals
- 1/2" NPTF Male thread connection
- 18 gauge wire standard (6" leads)
- 250 VAC/VDC Max.
- 10 Amps max. rating
- P20020 Sub Micro Male for Molding
- This Sub-Micro 8mm Male Connector is designed as a small electrical interface that can be molded into other products creating an environmentally protected quick connect interface. The P20020 male connector is designed to mate with Series 5000 8mm female connectors.
Features are:
- 2+ or 3+ Ground terminals
- 8mm centers
- Glass fiber reinforced nylon
- 250 VAC/VDC Max.
- 6 Amps max. rating
- Temp. rating -40° to 125° C
- P20420 Sub Micro Press In Mounting
- This Sub-Micro 8mm male connector is designed to press into a hole as a means of mounting. The P20420 connector is built to mate with Series 5000 8mm center female connectors.
Features are:
- 2+ or 3+ Ground terminals
- 8mm centers
- Glass fiber reinforced nylon
- 250 VAC/VDC Max.
- 6 Amps max. rating
- Temp. rating -40° to 125° C
- P30120 Sub Micro 9mm Male for Plate Mount
- This Sub-Micro 9mm male plate mount connector is offered in 2+ or 3+ ground versions. Easy to install using the template in the dimensional data. The P30120 connector is built to mate with Series 5000 9mm center female connectors.
Features are:
- 2+ or 3+ Ground terminals
- 9mm centers
- Glass fiber reinforced nylon
- 250 VAC/VDC Max.
- Nitrile gasket
- Temp. rating -40° to 125° C
|
![[Flo-Products Company Logo]](images/fplogo1.gif)