[Flo-Products Company Logo]
 

Canfield Connector

Connectors

Series iLW Interposed Lighted Wafers

The Canfield Interposed Lighted Wafer is an electronic, state of the art lighting module designed to install between a DIN type coil and the mating connector. Utilizing SMT (Surface Mount Technology), the iLW's ultra-thin design and high luminescence Gallium Arsenide LEDs enable the lighted wafer to retrofit existing applications or to be used in conjunction with unlighted connectors. Designed to "sandwich" between the connector and the coil, the iLW seals from dust and moisture. The iLW can be installed several times without degradation of the contact surface and is not polarity dependent.

 
Technical Data
Retrofits: Sub-Micro 8mm
Sub-Micro 9mm
MINI Standard
ISO 43650 Form "A"
Voltages available: 12 -24 VAC/VDC 10 mA max.
120 VAC 6 mA max.
240 VAC 9 mA max.
Not polarity dependent
Environmental protection: NEMA type 4 and IP65 dust tight and water resistant
Ambient temperature range: -20° to 90° C
Light source: Gallium Arsenide light emitting diode
Wafer thickness: 2.85mm
Sub-Micro dimensions: Width 15.1mm, height 15.1mm
Sub-Micro contact spacing: 8mm Sub-Micro 8.0mm, 9mm Sub-Micro 9.4mm
MINI dimensions: Width 20.5mm, height 29.5mm
Sub-Micro contact spacing: Standard MINI 11.0mm, DIN "B" MINI 10.0mm
DIN 43650/ISO 4400 form "A" dimensions: Width 27.7mm, height 27.7mm
ISO contact spacing: 18mm

 
iLW - 00 3 2 0 Series iLW retro-fit indicator light; ISO/DIN 43650 interface; 12-24 VAC/VDC 50/60 Hz.
  -   |
|
|
|		 +
2
7
8		 Voltage
12 -24 VDC / VAC 50/60 Hz
120 VAC 50/60 Hz
240 VAC 50/60 Hz
  - 00 +
1
3
4
5		 Interface Type
MINI Standard
ISO/DIN 43650
Sub-Micro 8mm
Sub-Micro 9mm

 
If you are located in Missouri, Kansas, Nebraska, or Illinois, you may contact us at the following telephone and fax numbers with your requests or questions:
St. Louis telephone 314.428.4000 fax 314.428.4097
Kansas City telephone 913.829.5900 fax 913.829.0815
 
For ALL OTHER AREAS Please use the Info Request form for specific product information, pricing or other information. Please include company name, contact name, address, phone number and fax number to ensure a timely response.
 
Send e-mail to webmaster@flo-products.com with questions or comments about this web site.
Copyright © 2003 Flo-Products Company
Last modified:
Brochure: A56-1000 Rev. 03 2/02