[Flo-Products Company Logo]
 

Canfield Connector

Connectors

Series 5K Molded Mini and ISO Connectors

The Canfield Series 5K molded DIN solenoid valve connectors incorporate the same quality as Canfields' Series 5000 connectors but features a completely molded design. The 5K's low profile and straight wire outlet permit fast and sure electrical connection to any solenoid valve with the standard MINI or ISO interface. The 5K also features indicator lights and internal surge suppression in different versions.

 
Technical Data
The cable outlet is molded in.
Wire Gauge: ISO/MINI 18 AWG
Sub-Micro 20 AWG
Color: Black standard, translucent if lighted
Cross section of the conductor wire max.: 18 AWG
Rated voltage max.: 300 VDC / 250 VAC 50/60 Hz
Maximum approved current: ISO/MINI - 10 Amps, Sub-Micro - 6 Amps
No. of contacts: 2+ ground
2+ dual ground
3+ ground version not available lighted
Environmental protection: NEMA type 4 and IP65 dust tight and water resistant
Ambient rated temperature: -25° to 80° C
Standard MINI dimensions: Width 21mm, length 27mm
ISO4400/DIN 43650 Form "A" dimensions: Width 27mm, length 27mm
Sub-Micro /DIN 43650 Form "C" dimensions: Width 16mm, length 16mm
Standard contact spacing: MINI - 11mm
ISO 4400/DIN 43650 Form "A" - 18mm
Sub-Micro Din 43650 Form C = 8mm
Sub-Micro Standard - 9.4mm

 
5K 3 0 - 1 2 5 0 0 Series 5K connector; 3 ft. wire length; no suppression; nitrile gasket; MINI connector type; 2+ ground contacts; unlighted.
  |
|
|
|
|		 |
|
|
|
|		   |
|
|
|
|		 |
|
|
|
|		 |
|
|
|
|		 |
|
|
|
|		 +
0
2
5
8		 Lighting Specification
Unlighted
6 - 24VDC/VAC 50/60 Hz (Not available in 3+ ground)
48 - 120 VDC/VAC 50/60 Hz (Not available in 3+ ground)
100 - 240 VAC 50/60 Hz (Not available in 3+ ground)
  |
|
|
|
|
|		 |
|
|
|
|
|		 - |
|
|
|
|
|		 |
|
|
|
|
|		 |
|
|
|
|
|		 +
0
1
2
3
4		 Contacts
2+ Ground
3+ Ground (N/A MINI)
2+ Dual ground (Sub-Micro only)
3+ Ground down (Sub-Micro only)
3+ Ground up (Sub-Micro only)
  |
|
|
|
|		 |
|
|
|
|		 - |
|
|
|
|		 |
|
|
|
|		 +
3
4
5
6		 Connector Type
8mm Sub-Micro
9mm Sub-Micro
MINI
ISO
  |
|
|		 |
|
|		 - |
|
|		 +
1
2		 Wire Marker
With wire marker
Without wire marker
  |
|
|
|
|		 |
|
|
|
|		 - +
0
1
2
3		 Gasket
Incorporated polyurethane seal (Sub-Micro only)
Nitrile
Silicone
Nitrile profile (N/A Sub-Micro)
  |
|
|
|		 +
0
1
2		 Suppression Type
No suppression
Diode (DC only) (Not available in 3+ ground)
Metal Oxide Varistor (MOV) (Not available in 3+ ground)
  +
3
6
9		 Wire Length
3 ft.
6 ft.
9 ft.

 
If you are located in Missouri, Kansas, Nebraska, or Illinois, you may contact us at the following telephone and fax numbers with your requests or questions:
St. Louis telephone 314.428.4000 fax 314.428.4097
Kansas City telephone 913.829.5900 fax 913.829.0815
 
For ALL OTHER AREAS Please use the Info Request form for specific product information, pricing or other information. Please include company name, contact name, address, phone number and fax number to ensure a timely response.
 
Send e-mail to webmaster@flo-products.com with questions or comments about this web site.
Copyright © 2003 Flo-Products Company
Last modified:
Brochure: A56-1000 Rev. 03 2/02